| User Reviews Send this to a friend | |||||||||||||||
| JBL AV1 7.1 Channel Surround Processor | |||||||||||||||
 |
|
||||||||||||||
Product Description |
|||||||||||||||
| First MSRP $5,000.00 Analog Audio Inputs Eight stereo (RCA) or five stereo and one 5.1-channel or two stereo and two 5.1-channel connectors Digital Audio Inputs Four S/P-DIF coaxial (RCA) and four S/P-DIF optical (TosLink) connectors; coaxial and optical input connectors conform to IEC-958, S/P-DIF standards; accepts 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates; accepts 1624 bits PCM audio, Dolby Digital, DTS and DTS-ES discrete data formats Audio Output(s) Eight unbalanced (RCA) connectors for front L/R, center, subwoofer, side L/R and rear L/R Audio Processing Section A/D Conversion 24-Bit, 96kHz, dual-bit architecture D/A Conversion 24-Bit, 44.1kHz to 192kHz, multi-bit architecture Frequency Response 10Hz to 20kHz, +0.05dB/0.1dB, 0.5dB at 40kHz, reference 1kHz THD + Noise Below 0.008% at 1kHz, maximum output level Dynamic Range 108dB minimum, 22kHz bandwidth S/N Ratio 108dB minimum, 22kHz bandwidth Input Sensitivity 200mV RMS (2V RMS for maximum output level) at 0dB input gain Output Level 150mV RMS typical, 6Vrms maximum; maximum value with full-scale input signal and volume at +12dB Video Input & Output Connectors Video Inputs Five composite (RCA), five S-video and three component video (RCA) Video Outputs One composite (RCA), one S-video and one component (RCA) Composite & S-video Performance Compatibility NTSC, PAL and SECAM Impedance 75 Ohms Bandwidth >25MHz Component Video Performance Compatibility 3-Channel (Y/Pr/Pb), format-independent Impedance 75 Ohms Insertion Loss <3dB Bandwidth >150MHz General Trigger Outputs One power on/off and one programmable connector on 5-pin DIN RS-232 Serial Input/Output Two 9-pin D-sub connectors Power Requirements 90 250 VAC, 50Hz 60Hz, 60W (universal line input), detachable power cord Rack Mounting Optional brackets are available for installation in a standard 19" equipment rack (two rack units required for AV1). Dimensions (H x W x D) 3-13/16" x 17-5/16" x 14-7/8" Weight 17 lb/7.7kg | |||||||||||||||
JBL AV1 7.1 Channel Surround Processor Details |
|||||||||||||||
|
|||||||||||||||
Video Reviews |
|||||||||||||||
 No video reviews found for this product.
|
|||||||||||||||
Customer Reviews For JBL AV1 7.1 Channel Surround Processor |
|||||||||||||||
 No customer reviews were found for this product.Best buy for " JBL AV1 7.1 Channel Surround Processor ", Lowest Price JBL AV1 7.1 Channel Surround Processor + Free shipping. Get JBL AV1 7.1 Channel Surround Processor Now! |
|||||||||||||||
Related posts:
- JBL AV1 7.1 Channel Surround Processor
- TCC TC-753LC Phono Preamp w/Level Control and AUX Input
- TC-7510 Digital Optical Toslink Coax to Analog Stereo RCA Audio Converter, 4 digital inputs to 2 analog outputs, Headphone Amplifier
- Ming Da MC 7R Preamplifier
- NHT Controller 7.1 Preamp Processor
- RDL STM-LDA3 Mic Preamplifier Studio Quality with Phantom Three Distributed Line Level Outputs-Power Supply NOT INCLUDED!
- TA-E9000ES 5.1 Channel Surround Sound Pre-Amplifier
- PYLE PWMA3003T 3000 Watts Hybrid PreAmplifier with AMFM Tuner/USB/Dual Wireless Mic
- TCC TC-760LC Moving Magnet / Moving Coil Phono Preamp w/Level Control
- NAD C 165BEE Stereo Preamplifier